Home > All Categories > Fire Hose & Accessories > Fire Hose > Forestry Fire Hose >

Firequip Wildland Ultra Forestry Firefighting Hose
Wildland Ultra Forestry Firefighting Hose

Alternative Views:

Wildland Ultra Forestry Firefighting Hose - Single Jacket Thermo-Polyurethane Lined

Outer Jacket: xxxx 100% Polyester Yarn with Filament Polyester Filler Yarns
Extruded thermo-polyurethane, compounded to resist ozone
Protective Treated Coating:
Untreated White Available:
187 Type I
Specification 187:
Meets USDA FSS 5100-187 Type 1

Performance Features:
  • Premium Quality, long lasting hose
  • Mildew Resistant - No drying required
  • Lightweight - Designed to be carried by back pack or my hand for long distance over steep or rough terrain and forest conditions
  • Color Impregnation for greater abrasion resistance, heat resistance, reduced water absorption
  • Non-weeping (weeping hose available upon request)
  • Wildland available in 3/4" with garden hose threads. Yellow WearGuard treated 100' - 3 lbs.
  • One-Year Warranty


  • Brush, Grass and Forestry Fires
  • Designed for use with portable pumps, heavy duty pumps and tank trucks
  • Wildland Applications

Size and Pressures:

xxxx Bowl Size: xxxx Proof PSI: xxxx Service PSI: xxxx Burst PSI:


Standard Length:
50', 100'

Uncoupled 50' Lengths:

xxx lbs.


This single jacket 600lb. proof test Forestry Hose is designed for use with portable gasoline/diesel pumps, heavy duty Fire Engine Tankers and Pumpers. Light in weight, this hose is made to be transported by air, man-packed or by animal for long distances over steep and rough forested areas. All components of the hose system shall be fabricated from mildew resistant material permitting storage over extended periods of time in damp areas without concern for degradation or deterioration. All components shall be made in the USA.


The fire hose to be supplied under this specification is a premium quality, single jacket forestry fire hose. All materials used in the fabrication of the hose shall be of the best quality commercially available. The manufacturer shall be ISO 9001-2008 Quality Certified.

Jacket Construction
The 100% synthetic warp yarn shall be virgin fiber domestically produced to be free from defects, dirt, knots, lumps and irregularities of weave as is consistent with quality manufacturing. The filler yarn shall be all polyester filaments, high strength material suitable in all respects for the manufacture of high quality fire hose. The jacket shall be constructed using a twill weave design to reduce friction loss and increase gallons per minute (GPM) flow due to the water way being smooth. Traditional square weave design is Not Acceptable and will be cause for the hose to be rejected.

Lining Construction
The thermoplastic lining shall be a single-ply extruded tube, compounded to reduce deterioration by ozone. The finished form shall be free of pits or other imperfections and shall have a smooth finish. No reclaimed material shall be used. The thickness shall not be less than .016" nor greater than .020" for the 1" hose and not less than .018" nor greater than .022" for the 1-1/2" hose. Tensile Strength not less than 1200 psi Elongation not less than 400%. Adhesion shall be such that a 12 lb. weight shall not move a 1-1/2" strip cut transversely at greater than 1" per minute.

Hydrostatic Tests
Each length of hose shall be capable of a hydrostatic pressure of 600 psi for fifteen (15) seconds, without leaking in the hose or at the couplings or breaking any yarn in the jacket. Burst of a 3 ft. specimen selected from every 5000' shall with stand without failure a pressure of 900 psi, or three times the Service Test Pressure of 300 psi while lying straight or curved to a radius of 27". Kink pressure shall be such that a random length of every lot of 2500' shall withstand without failure a hydrostatic pressure of 450 psi, or 1-1/2 times the Service Test Pressure of 300 psi while in a kink condition.

Hose Length and Diameter
The hose shall be available in nominal 50 and 100 foot lengths. The hose shall have an inside diameter of not less than the trade size of the hose.

Hose is available with internal expansion ring anodized aluminum couplings with NH, NPSH, or Quarter Turn couplings, meeting U.S. Forestry specifications.

The manufacturer warrants the hose to be free from defects in materials and workmanship for a period of one year. This warranty shall provide for the repair or replacement of hose and couplings proven to have failed due to faulty material or workmanship.

Item# Item Name Price Qty Add
FQ-FH10YD 1" X 100' NST Forestry, White
FQ-FH10YA 1" X 25' NST Forestry, White
FQ-FH10YB 1" X 50' NST Forestry, White
FQ-FH15YD 1-1/2" X 100' NST Forestry, Yellow
FQ-FH15YA 1-1/2" X 25' NST Forestry, Yellow
FQ-FH15YB 1-1/2" X 50' NST Forestry, Yellow
Check the items you wish to purchase, then click

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

All Categories > Fire Hose & Accessories > Fire Hose > Forestry Fire Hose