Home > All Categories > Fire Hose & Accessories > Fire Hose > Forestry Fire Hose >

Neidner ECONOFLO Forestry Fire Hose
Neidner ECONOFLO Forestry Fire Hose

Alternative Views:

Price: $99.75

Availability: Available for order
Product Code: ND-2463

Neidner ECONOFLO Forestry Fire Hose

Lightweight and compact, the Neidner ECONOFLO has standard brass GHT fittings and is factory proof pressure test rated at 300 PSIG (2100 kPa).

A 100% filament polyester, elastomer lined, single-jacket flat-woven hose; 5/8" (19 mm and 16 mm) sizes with yellow ENCAP or untreated.

Designed for wildland applications, ECONOFLO can also be used for Hazardous Material operations and personnel decontamination.

When used on or around asphalt or pavement, care must be taken to minimize damage by abrasion or pin-holing may occur.

ECONOFLO options include a Pouch for belt wear and a compact Brass Nozzle.

Its variety of exceptional features makes ECONOFLO a very popular hose.

Standard length: 50 (15,2 and 30,5 m).

  • 50' of hose
  • Nozzle
  • Pouch
  • Yellow Hose only
ECONOFLO Specifications:
  • The hose shall be a single jacket construction with 100% spun polyester yarn.
  • There shall be a minimum of 21.0 filler yarns per inch in the jacket.
  • The thickness of the lining shall be 0.012" (305 m) minimum and it shall be constructed of extruded T.P.U. elastomer.
  • If required (optional), the outside jacket shall be treated with yellow ENCAP elastomer, which shall completely encapsulate the jacket fibers and not merely surface coat the jacket.
  • The hose service temperature range shall be -60 degrees F to 140 degrees F (-51 degreeC to 60 degreeC).
  • At 300 PSIG (2100 kPa), its elongation shall not exceed 2% of the initial hose length, it shall not warp more than 10 inches (25 cm) and should not rise from the test table.
  • The hose shall not twist more than 5 turns per 50 ft (15,2 m) while at 300 PSIG (2100 kPa).
  • Minimum service test pressure of 150 PSIG (1050 kPa).
  • Minimum proof test pressure of 300 PSIG (2100 kPa).
  • Minimum straight burst test pressure of 600 PSIG (4200 kPa).
  • The hose while curved to a radius of 27" (69 cm) shall not burst at less than 600 PSIG (4200 kPa).

Hose Size:

5/8" (16 mm)
Coupling Bowl Size:

5/8" GHT (15.9 mm)
Weight (per 50'):
1 lb (0.5 kg)
Coil Diameter (per 50'):
9" (23 cm)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

All Categories > Fire Hose & Accessories > Fire Hose > Forestry Fire Hose