Home > All Categories > Pumps > Mid-Range >

Hale HPX300-B18 Skid Mount Firefighting Pump
Hale HPX300-B18 Skid Mount Firefighting Pump

Alternative Views:

Price: $3,850.00

Price with Selected Options: $3,850.00

Availability: Available for order
Product Code: HALE-HPX300-B18

Hale Base

Skid Base (truck mount)
Hale Battery & Cables Kit
Click to view another Hale Battery & Cables Kit

Battery & Cables Kit [Add $355.00]
Hale Control Panel
Click to view another Hale Control Panel

X-Stream Panel (discharge gauge, start button, on/off switch, oil light, choke/throttle, primer)
no panel required
Hale Fuel Tank

5 Gallon Remote Fuel Tank w/ Mounting Bracket [Add $750.50]
6 Gallon Portable Fuel Tank Assembly [Add $580.00]
No Fuel Tank (std)
Hale Hourmeter
Click to view another Hale Hourmeter

Maintenance Hour Meter [Add $170.00]
Round Hour Meter, 12/24 Volt DC [Add $315.00]
none (std)
Hale Muffler Blanket
Click to view another Hale Muffler Blanket

Muffler Blanket [Add $190.00]
Hale Muffler Exhaust Kit
Click to view another Hale Muffler Exhaust Kit

Muffler Exhaust Elbow with Rain Cap (shipped loose) [Add $140.00]
none (std)
Hale Primer

Exhaust Primer (std)
501-3090-01-0: Electric Primer with PVG Valve (shipped loose) [Add $1,020.00]
Hale Tachometer
Click to view another Hale Tachometer

Tach Hour Meter, Programmable [Add $295.00]

Hale HPX300-B18 Skid Mount Firefighting Pump

The Hale HPX300-B18 Skid Mount Firefighting Pump is a medium pressure, medium volume fire pump.

350 GPM @ 40 PSI
225 GPM @ 75 PSI
120 GPM @ 100 PSI

The pump body and head are coupled together with a stainless steel bank clamp which allows for quick pump removal for servicing.

X Base Features:
  • Maxstream pump without base fuel tank - configured for easy installation by truck builders
  • Exhaust primer
  • Electric Start with manual recoil backup
  • Mounted to a steel skid base plate that can easily be mounted into any vehicle
  • Rail base includes all required hardware and vibration isolators
  • Control Panel (ships loose) with mounted single discharge gauge and engine controls is included as standard
  • 6' wiring harness

Control Panel
  • Discharge gauge
  • Priming lever
  • Start button
  • ON/OFF switch
  • Oil warning light
  • Choke
  • Throttle control

  • Flows ranging from 120 GPM @ 100 PSI to 350 GPM @ 40 PSI
  • Ultra-reliable Briggs & Stratton 18-HP 4-cycle V-Twin gasoline engine
  • Electric start with recoil backup
  • Anodized aluminum alloy pump head and body
  • Pump head and body coupled together with stainless steel band clamp for easy serviceability
  • Bronze impeller and renewable wear rings
  • Self-adjusting mechanical seal
  • Exhaust gas venturi priming
  • 3.0" NPT / 4.0" Victaulic suction connection; 3.0" NPT discharge

21 inches
18 inches
20 inches
163 lbs (74 kg)
Suction Connection:
3.0" Female NPT / 4.0" Victaulic
Discharge Connection:
3.0" Female NPT
Body and Head:
Lightweight, high strength, anodized aluminum
Pump Shaft:
Engine shaft with bronze sleeve
Enclosed type, silicon bronze
Clearance Rings:
Renewable type, bearing bronze
Gear Box:
Direct drive
Exhaust venturi
Low Pressure, High Volume
Max Pressure (PSI):
120 PSI
Max Flow (GPM):
375 GPM

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

All Categories > Pumps > Mid-Range
All Categories > Pumps > Pumps by MFG > Hale