Home > All Categories > Foam > Foam Eductors/Proportioners >

FoamPro 1600/1601 Class A Series Foam Injector
FoamPro 1600/1601 Series


 
Alternative Views:


Price: $4,995.00

Price with Selected Options: $4,995.00

Availability: Usually Ships in 2 to 4 Weeks
Product Code: FOAMPRO-1600

FoamPro 1600/1601 Series

FoamPro 1600 (1-1/2")
FoamPro 1600 (1-1/2") + Manifold [Add $316.00]
FoamPro 1600 (2")
FoamPro 1600 (2") + Manifold [Add $316.00]
FoamPro 1601 (1-1/2")
FoamPro 1601 (1-1/2") + Manifold [Add $316.00]
FoamPro 1601 (2")
FoamPro 1601 (2") + Manifold [Add $316.00]
FoamPro Check Valve

1-1/2" Nickel Plated Check Valve [Add $460.00]
2" Nickel Plated Check Valve [Add $465.00]
none
FoamPro Foam Tank Sensor

Top/Bottom Mount
Side Mount [Add $20.00]
FoamPro Victualic Ended Check Valve

1-1/2" victaulic coupling size
2" victaulic coupling size [Add $10.00]
FoamPro Waterway Check Valve

1-1/2" NPT (thread size), 3/8" NPT (injection & drain port size)
2" NPT (thread size), 3/8" NPT (injection & drain port size) [Add $18.00]

Qty:  
Description
 
FoamPro Class A Foam: 1600/1601 Series

The FoamPro 1600 Class A Foam Series is available in two models, differing only in capacity.

Each system includes a Hypro twin plunger pump and DC (12 or 24 volt) motor assembly. Also included is a panel-mounted operator control unit with instructions, flowmeter (1-1/2" or 2"), strainer, foam injection check valve, complete shielded cable set and RFI/EMI suppression kit.

The system features fully automatic foam proportioning, regardless of changes in flow or pressure, and delivers unmatched accuracy over the entire flow range. It proportions continuously, with no stopping to refill the foam tanks.

FoamPro Models 1600/1601 are capable of quickly pulling concentrate 3 feet allowing for increased mounting and installation flexibility.

Features:
  • Discharge side injection
  • No in-line restrictions
  • Installs easily in new or existing apparatus
  • Provides the smoothest proportioning available at ultra-low flows
  • Delivers 0.1 to 1.7 gpm (.38 to 6.4 L/min) of concentrate
  • Achieves full pump capacity with all known Class A concentrates
  • 3 feet lift capability
  • Optional:
  • Remote Start/Stop for in-cab control
  • Remote simulated flow switch

Control module features:
  • Injection percentage from 0.1% to 1.0%
  • On/Off control
  • Foam percentage selector
  • Low concentrate warning indicator
  • Ultra-Bright LED light
  • Advanced environmental protection
  • Simulated flow - auto disengage

Ideal for use on:
  • Brush rigs/Skid units
  • Fast attack/wildland vehicles
  • Municipal apparatus
  • Compressed Air Foam Systems



1600
1601
Foam Pump:
Hypro Plunger Pump

Hypro Plunger Pump
Foam Output:

1.7 gpm @ 200 psi
(6.4 L/min @ 13.8 BAR)

1.0 gpm @ 200 psi
(3.8 L/min @ 13.8 BAR)
Pump Motor:

1/3 hp (.25 kW) 12 & 24 volt DC

1/3 hp (.25 kW) 12 & 24 volt DC
Max Operating Pressure:

400 psi (27.6 BAR)

400 psi (27.6 BAR)
Max Operating Temperature:

160 degrees F (71 degrees C)

160 degrees F (71 degrees C)
Max Amp Draw:

30 amps

30 amps
Amp Draw @ 200 psi (13.8 BAR):

30 amps @ 12 volt DC
15 amps @ 24 volt DC

19 amps @ 12 volt DC
11 amps @ 24 volt DC


System Capacity:
Foam Concentration:

1600 Max Water Flow GPM (L/min):
1601 Max Water Flow GPM (L/min):
0.2%
850 GPM (3,218 LPM)
500 GPM (1,893 LPM)
0.5%
340 GPM (1,287 LPM)

200 GPM (757 LPM)
1.0%
170GPM (644 LPM)
100 GPM (379 LPM)


Attack Capability:
CLASS A Foam Concentration:

1600 Max Coverage per Critical Application Rate (Iowa Formula):
1601 Max Coverage per Critical Application Rate (Iowa Formula):
0.2%
85,000 cubic feet

50,000 cubic feet
0.5%
34,000 cubic feet
20,000 cubic feet
1.0%
17,000 cubic feet
10,000 cubic feet





Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

All Categories > Foam > Foam Eductors/Proportioners