Home > All Categories > Foam > Foam Concentrate >

Chemguard 6% AFFF Concentrate
Chemguard 6% AFFF Concentrate


 
Price: $115.00

Availability: Available for order
Product Code: CG-C603
Qty:

Description
 

Chemguard 6% AFFF Concentrate

Chemguard 6% AFFF is a specially formulated, synthetic, aqueous film forming foam concentrate. A vapor suppressing aqueous film is formed by the foam solution draining from the expanded foam blanket.

It is intended for use at a proportioning rate of 6% (6 parts AFFF concentrate to 94 parts water) on Class B hydrocarbon type fuels such as gasoline, kerosene, diesel, etc. Chemguard 6% AFFF is not intended for use on fuels, which are polar solvent/water miscible such as alcohols, ketones, esters, etc.

FEATURES

  • U.L. Listed, Foam Liquid Concentrates
  • U.L. Canada Listed
  • Performance to ICAO, Doc. # 9137, Part 1, Chapter 8, Level B verified
  • U.L. recommended application rate on hydrocarbon type fuel is .10/gpm ft
  • Suitable for use with either fresh or salt water
  • Excellent wetting characteristics when used in combating Class A fuel fires
  • Suitable for use with both air-aspirating foam and standard water fog nozzles
  • Suitable for use with deluge or closed head foam water sprinkler systems
  • If inadvertently frozen, thawing will render product completely serviceable again
  • Suitable for use with carbon steel, fiberglass, polyethylene or stainless steel. Chemguard 6% AFFF is not compatible with galvanized pipe or fittings in an undiluted form.
  • Suitable for use with dry chemical extinguishing agents


PROPORTIONING

  • Fixed or portable in-line educator
  • In-line balanced pressure and pump pressure proportioning skid
  • Bladder tank balanced pressure proportioning system
  • Around the pump proportioner
  • Handline, air-aspirating nozzle with fixed eductor pickup tube


DISCHARGE DEVICES

  • Foam Chambers
  • Air-aspirating and non air-aspirating sprinkler heads or spray nozzles
  • Standard water fog nozzles for hand lines and monitors
  • Air-aspirating foam nozzles
  • Foam makers for use with either Floating Roof storage tanks or Dike/Bund protection systems
  • High back pressure foam makers for sub-surface base injection system (hydrocarbon fuels)


APPLICATIONS

  • Crash Fire Rescue
  • Storage Tanks(non-polar solvent fuels only)
  • Truck/Rail loading or unloading facilities
  • Processing/Storage Facilities
  • Docks/Marine Tankers
  • Flammable Liquid Containment Areas
  • Mobile Equipment


FOAM PROPERTIES

Aspirating type discharge devices typically generate expansion ratios between 6-10 to 1 when 6% AFFF is mixed with water at the correct ratio. Non-aspirating type devices will typically generate expansion ratios of between 2-4 to 1. Expansion ratios are dictated by the type of discharge device, flow rate and discharge pressure.

TYPICAL PROPERTIES AT 77 degrees F (25 degrees C)

Appearance:Clear Slightly Yellow
Specific Gravity:1.011
pH:7.5
Viscosity:1.2 cps


ENVIRONMENTAL IMPACT

Chemguard 6% AFFF is biodegradable, low in toxicity and can be treated in sewage treatment plants. Please refer to Chemguard Technical Bulletin regarding foam products and the environment.

STORAGE

If kept in the original unopened and airtight Chemguard supplied container and stored within the temperature range of 35 degrees F - 120 degrees F (2 degrees C - 49 degrees C) a shelf life of between 20-25 years can be expected. When stored in other than the manufacturers supplied container, please check with Chemguard for storage guidelines.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

All Categories > Foam > Foam Concentrate