Home > All Categories > Foam > Foam Concentrate >

Chemguard 3% - 3% AR-AFFF Concentrate
Chemguard 3% - 3% AR-AFFF Concentrate

Price: $148.00

Availability: Available for order
Product Code: CG-C333P

Chemguard 3% - 3% AR-AFFF Concentrate

The Chemguard 3% - 3% AR-AFFF is a specially formulated, free flowing, viscous, aqueous film forming foam concentrate. It forms a vapor suppressing aqueous film on hydrocarbon type fuels or a polymeric membrane on polar solvent/water miscible type fuels.

The Chemguard 3% - 3% AR-AFFF is intended for use at a proportioning rate of 3% (3 parts AR-AFFF to 97 parts water) on hydrocarbon fuels such as gasoline, kerosene, diesel, etc., and on polar solvent fuels such as alcohols, ketones, esters, etc. Chemguard 3% - 3% AR-AFFF is specifically formulated for Topside, or Type II and Type III applications.

  • U.L. listed, Foam Liquid Concentrate
  • Used at a 3% proportioning rate on both hydrocarbon and polar solvent fuels
  • Suitable for use with either fresh or salt water
  • Excellent wetting characteristics when used in combating Class A fuel type fires
  • Suitable for use with fiberglass, polyethylene or stainless steel. 3% - 3% AR-AFFF is not compatible with galvanized pipe or fittings in an undiluted form
  • Suitable for use on hydrocarbon or polar solvent type fuels
  • Suitable for use with both air-aspirating foam and standard water fog nozzles
  • Economized for Topside applications

  • Fixed or portable in-line eductors
  • In-line balanced pressures and pump pressure proportioning systems
  • Around the pump proportioners
  • Handline, air-aspirating nozzles with fixed eductor pickup tube

Discharge Devices:
  • Foam Chambers
  • Standard water fog nozzles for handlines and monitors
  • Air-aspirating foam nozzles
  • Foam makers for use with either Floating roof storage tanks or Dike/Bund protection systems

Foaming Properties:
  • Aspirating type discharge devices typically generate expansion ratios between 6-10 to 1 when 3% - 3% AR-AFFF is mixed with water at the correct ratio
  • Non-aspirating type devices will typically generate expansion ratios of between 2-4 to 1
  • Expansion ratios are dictated by the type of discharge device, flow rate and discharge pressure

Typical Properties at 77 degrees F (25 degrees C):
Off White Gel-Like Liquid
Specific Gravity
1.02 g/ml
7.7 +/- 0.3
1500 cP Minimum*
*Brookfield #4 Spindle at 30 rpm

Design Information:
  • Cannot be used in sub-surface applications with polar solvent type fuels

Application Rates:
  • Recommended application rate on hydrocarbon type fuels is 0.10 gpm/ft. On the following specific polar solvent type fuels these are the recommended minimum application rates.

0.16 gpm/ft
0.13 gpm/ft
0.14 gpm/ft
Methyl Ethyl Ketone:
0.13 gpm/ft
Ethyl Acetate:
0.15 gpm/ft
0.15 gpm/ft

Environmental Impact:
  • Chemguard 3% - 3% AR-AFFF is biodegradable, low in toxicity and can be treated in sewage treatment plants
  • Please refer to Chemguard Technical Bulletin regarding foam products and the environment

  • If kept in the original unopened and airtight Chemguard supplied container and stored within the temperature range of 35 degrees F - 120 degrees F, a shelf life of between 20 - 25 years can be expected
  • If the AR-AFFF is to be stored in an atmospheric type foam concentrate storage tank whether on mobile apparatus or stationary, limit the airspace above the surface of the concentrate where possible and place a thin layer of quality mineral oil on the surface of the foam concentrate to minimize any effect from evaporation

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

All Categories > Foam > Foam Concentrate